Providing optimized solutions for your mine, one-stop service for mineral
Xinhai mineral processing equipment mainly include: grinding equipment,
flotation equipment, dewatering equipment, magnetic separation equipment,
and so on. Some of the equipment is Xinhai independent research and
development, and has been awarded national patent.
Gold CIP Production Line adsorbs gold from cyaniding pulp by active carbon
including 7 steps: leaching pulp preparation, cyaniding leaching, carbon
adsorption, gold loaded carbon desorption, pregnant solution electrodeposit,
carbon acid regeneration, leaching pulp. View details
Ball mill is the dispensable device in beneficiation industry, equally, it is
Xinhai News Introduction of common crushing flows in mineral processing plant
Crushing is necessary for mineral processing plant, and there are 2 kinds of crushing process. The one is two stages crushing, and the other one is three stages crushing. Two stages crushing is divided into two stages closed-circuit crushing and two stages open- circuit crushing, the same division of three stages crushing.
Xinhai simply analyzed the applications of these crushing flows as follow:
Two stages crushing
Two stages crushing is suitable for underground mining method of small size mines, and the total reduction ratio is small, generally about 15-25%; the crushing capacity is not large, less than 1000t/d. The two stages closed-circuit crushing is composed by two stages crushers and checking screen into a closed circuit. The main objective of this crushing flow is to ensure product size to meet the requirements, and not to affect the next grinding operation.
For example, the crude ore is less than 300mm; after the first prescreening, the ore less than 75mm does not need to go through the first stage crushing, only 75-300mm ore on the screen enters the crusher for crushing and screening operations for the first time; and then the ore from the first prescreening and the ore from the first crushing enter into the screening; the ore 15-75mm enters into the second crushing.
Three stages crushing
There will be pre-screening in three stage crushing process. The three stages open circuit crushing process is rarely used, mainly because the crushing granularity cannot reach the requirements of particle size; the three stages closed-circuit crushing is the most common crushing process, and it is mainly suitable for the large, medium-sized ore dressing plant. The total reduction ratio is large, about 25-200mm. The max. feeding particle size is up to 1000mm.
As for the beneficiation process today, gold tailings contain a certain number of gold residues after the gold processing. It is wasteful to stack these tailings without reusing. According to incomple... [more]
None ... [more]
© 2017 Shandong Xinhai Mining Technology & Equipment Inc.     Technical Support:
Beijing Xinhulian Technology Co., Ltd.
Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China