Providing optimized solutions for your mine, one-stop service for mineral processing plant!
Xinhai mineral processing equipment mainly include: grinding equipment, flotation equipment, dewatering equipment, magnetic separation equipment, and so on. Some of the equipment is Xinhai independent research and development, and has been awarded national patent. View details
Gold CIP Production Line adsorbs gold from cyaniding pulp by active carbon including 7 steps: leaching pulp preparation, cyaniding leaching, carbon adsorption, gold loaded carbon desorption, pregnant solution electrodeposit, carbon acid regeneration, leaching pulp. View details
Ball mill is the dispensable device in beneficiation industry, equally, it is th...
Home Xinhai News All slime cyanidation-countercurrent method is successfully applied to a gold mine
The original beneficiation process of the gold mine was all slime cyanidation CIP process. Because of the change of mining method, the mud content reached more than 15%, which makes the leaching period longer and limited processing capacity; the flotation recovery rate decreased; the production cost became higher. Xinhai needed to change the process to reduce the cost.
After contracting this gold reconstruction project, Xinhai decided to take the test with all slime cyanidation-countercurrent washing-carbon solution method, because the required leaching ore particle of this new process is larger than the process of original process.
The problems of all slime cyanidation CIP process
This process required the leaching ore granularity is fine, -200 mesh accounted for 85%, but the gold mine granularity is coarse, and the mill processing capacity is limited resulting in the entire gold processing decreasing, and the cost of ore dressing increasing; secondly, carbon leaching carbon was weared seriously reaching 120g/t according to Xinhai Research Institute testing; so the overall economic benefits were low.
The all slime cyanidation-countercurrent washing-carbon solution method designed by Xinhai Mineral Processing Research Institute adopted classifying control and thickening before leaching. The details of the test as follow
1. Leaching rate kept stable while the leaching ore particle size was changing in certain range.
Particle size 200 mesh
Grade of crude gold/g
Grade of tailings/g
Gold leaching rate/%
2. Ore pulp would not become layering with the strong agitation.
3. The low pulp concentration did not affect the leaching because of the simple ore properties and fast leaching speed.
Technology Index Comparison
Grade of crude gold
Leaching ore particle size 200 mesh
Grade of tailings
Gold leaching rate
Power consumption /kw
all slime cyanidation CIP
All slime cyanidation-countercurrent washing-carbon solution method
According to the comparison, it showed that the mineral dressing recovery rate was the same, but the cost of all slime cyanidation-countercurrent washing-carbon solution method saved 15.06 Yuan/ton which brought benefits over 3 millon Yuan per year.
Iran Fei Bike asked for help about the mineral processing of its phase II expansion when they knew Xinhai had investigation in Iron. ... [more]
Ball mill should keep even feeding in operation; the even feeding means stable feeding quantity and same particle size distribution. ... [more]
© 2017 Shandong Xinhai Mining Technology & Equipment Inc.     Technical Support: 北京鑫互联科技有限公司
Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China